Search for: All records

We introduce a trident edge coupler design optimized for the simultaneous coupling of two widely separated wavelengths (2 µm and 1 µm) between a lensed fiber and a 600-nm-thick X-cut lithium-niobate-on-insulator (LNOI) waveguide. These wavelengths are commonly encountered in nonlinear wave mixing applications, representing either the fundamental and second harmonics in second harmonic generation (SHG) processes or the leading and trailing edges of an octave-spanning spectrum generated through broadband nonlinear processes such as frequency comb or supercontinuum generation. Achieving efficient coupling between fibers and strongly confined waveguides in integrated platforms, such as LNOI, can be challenging due to the significant difference in spot sizes between the two wavelengths. Our trident edge coupler offers coupling losses below 1.4 dB for the 2 µm and 1 µm spots simultaneously, showcasing an average transmission enhancement of around 10% compared to the baseline of a single linear taper. Furthermore, it enables a reduction of transmission at 1.5 µm, a typical pump wavelength, with an attenuation of transmission over 10 dB compared to those at the 2 µm and 1 µm wavelengths. 

The significant advancements in autonomous vehicle applications demand detection solutions capable of swiftly recognizing and classifying objects amidst rapidly changing and low-visibility conditions. Light detection and ranging (LiDAR) has emerged as a robust solution, overcoming challenges associated with camera imaging, particularly in adverse weather conditions or low illumination. Rapid object recognition is crucial in dynamic environments, but the speed of conventional LiDARs is often constrained by the 2D scanning of the laser beam across the entire scene. In this study, we introduce a parallelization approach for the indirect time-of-flight (iToF) ranging technique. This method enables efficient and high-speed formation of 1D clouds, offering the potential to have extended range capabilities without being constrained by the laser coherence length. The application potential spans mid-range autonomous vehicles ranging to high-resolution imaging. It utilizes dual-frequency combs with slightly different repetition rates. The method leverages the topology of the target object to influence the phase of the beating signal between the comb lines in the RF domain. This approach enables parallel ranging in one direction, confining the scanning process to a single dimension, and offers the potential for high-speed LiDAR systems. A tri-comb approach will be discussed that can provide an extended unambiguous range without compromising the resolution due to the range–resolution trade-off in iToF techniques. The study starts by explaining the technique for parallel detection of distance and velocity. It then presents a theoretical estimation of phase noise for dual combs, followed by an analysis of distance and velocity detection limits, illustrating their maximum and minimum extents. Finally, a study on the mutual interference conditions between two similar LiDAR systems is presented, demonstrating the feasibility of designing simultaneously operating LiDARs to avoid mutual interference.